How to Reset Dolphin Robot Effortlessly?

Indeed, purchasing a brand new Dolphin pool cleaner robot is the best choice you can ever make to take control of your pool cleaning activity. With the help of this automated robotic cleaner, you can control, manage, and clean your swimming pool efficiently and conveniently. Despite the optimal performance of this device, sometimes, you need a fresh start and the reset Dolphin robot is a viable option for this.

So, if you also own this smart device and are seeking assistance with its resetting, then stay on this page. This guide provided you with detailed insights into the reset Dolphin pool cleaner process. Further, you will also get to know about the efficient tips to eradicate the common issues faced during the reset process. Let’s read this guide thoroughly!

Why Reset Dolphin Robot?

However, there are multiple reasons behind the Dolphin pool cleaner robot reset process. So, here are some of the major reasons:

How to Factory Reset Dolphin Robot Easily?

Generally, the Dolphin robot can be easily reset manually, as it is most preferred by the users, and is easy to be carried out. After that, the user-friendly interface of the My Dolphin app helps users reconnect and control the robot seamlessly. Here, are the detailed steps to reset Dolphin robot:

Manual Method For Dolphin Robot Reset

To begin with, disconnect the power cord from your robot and power supply.
Then, turn on the power and connect the power cable to the wall socket.
Further, connect the blue cable of the robot to the power source.
After that, turn on the power for around 30 seconds and then turn it off.
Wait for a few seconds and turn on the robot again.
Repeat turning on and off the robot thrice.
Now, the Dolphin robot resets.
Lastly, launch the My Dolphin Plus app to connect the robot again.

Reset Dolphin Pool Cleaner Failed? Try These Tips!

Occasionally, users get stuck when resetting their Dolphin pool cleaners or reset fails due to some uncertain reasons. The common reasons causing the Dolphin pool cleaner robot reset failure include connectivity or power supply issues, impeller issues, GFCI issues, technical glitches and bugs, etc. So, to get rid of these issues, you can try the below tips:

Most importantly, confirm that the blue cable of the robot is connected to the power source securely.
Make sure you have a sufficient power supply and power cords are working fine.
In addition, use the original power adapters and power sockets. Otherwise, replace it with the new ones.
Also, the power supply shouldn’t be in the delay mode and don’t use an extension cord.
Moreover, check that the cable is not tangled, or broken and it is long enough to cover the entire pool.
Soft reset or power cycle your robot to get rid of the technical glitches and bugs.
Certainly, there should be no debris or dirt on the Dolphin robot’s drives.
Handle the brushes with care and verify the tracks and wheels of the robot.
Regularly inspect the impeller and there should be no obstructions in front of the robot during the cleaning operation.
Further, clean the filter basket and remove the debris from the impeller house or cover.
If there are any hardware issues, change the device.
At last, when nothing works, factory reset your robot to eradicate the common issues.

Moreover, you have gained insights into effective troubleshooting tips to fix the issues faced during this process. To learn more, get in touch with us!